Vacuum Spare Parts UK: Find the Right Part for Gtech, Shark & Henry
When a vacuum cleaner stops working, most people assume it is time for a new one. Nine times out of ten, though, the fault is a wearable part - a clogged filter, a worn brush bar, a tired battery or a cracked dust bin - and the fix costs a fraction of a replacement machine. This guide walks you through finding the right spare part for your vacuum, brand by brand, and shows the Gtech and Shark lines you can compare on live UK prices right here on ValueScope.
Find the Exact Model Number First
Every vacuum spare part is made to fit a specific model or model range, so the single most important step is identifying your machine correctly. Parts that look almost identical rarely interchange: the AirRAM 2 K9 takes a grey battery of its own, while the AirRAM 3 Pink runs a 20V pack from the pink range, and a filter for the AirRAM 2 core range is listed separately from the K9 kit.
You will usually find the model number in one of these places:
- On a sticker on the underside of the machine or the floor head
- Inside or behind the dust bin compartment
- Printed on the battery pack itself (cordless models)
- On the wand or handle collar (stick vacuums)
Write down the full code, not just the brand. "Shark cordless" is not a model; a code such as IZ420UKT is. That code is what you will match against the part name before you buy.
Gtech Spare Parts: The Deepest Range on ValueScope
Gtech is where our spare parts coverage is strongest, with over 400 Gtech lines live at the time of writing, spanning the whole floorcare family. If your machine is a Gtech, start here.
AirRAM (cordless upright)
The range that made Gtech's name, with consumables and body parts for every generation: brush bars, filters, complete dust bins, bin lids, batteries and front rollers. A lost-suction AirRAM is almost always a filter or a full bin rather than a dead motor.
AirFOX Platinum (cordless stick)
The full spares set exists for this line: replacement batteries, chargers, brush bars and covers, filters, the filter shroud, dust bins, crevice tools and hoses - enough to keep a Platinum running for years.
HyLite (compact vacuum)
Small machine, same logic: brush bars, dust bin lids, telescopic handles and steering modules are all listed separately, so a dropped or snapped part does not write off the vacuum.
Orca (hard floor cleaner)
Gtech's floor washer has its own consumables, and these are the pages our visitors click most: the clean water tank, the dirty water tank, the mopping roller, the dual membrane filter and scented solution. Tanks and rollers are exactly the parts that wear first on any floor washer.
You can browse everything in one place in our Floorcare category.
Shark Vacuums: Spares by Another Route
Shark coverage on ValueScope works differently: the live feed from SharkNinja UK is mostly complete machines rather than loose spares, so the smart moves are upgrades and replacements. The clearest example is run time: the Shark Stratos Pet Pro with Double Battery (IZ420UKT) effectively ships you a spare battery from day one, which doubles the working life of the machine between charges and covers you when the first pack eventually fades.
If your machine is beyond economic repair, the current Shark range is worth a look before you pay full retail: the Anti Hair Wrap corded stick (HZ500UKT) suits smaller homes without battery worries, while the Lift-Away upright (NZ780UKT) covers full-size carpet cleaning. See everything on the Shark brand page.
Henry and Numatic: Identify the Part, Watch This Space
Henry stock rotates in and out of the site as merchants list it, so there may be nothing to compare on the day you read this. The identification advice stays the same either way. On a Henry, the model plate sits on the base of the machine or on the floor head, and the part you need is keyed to that code - bags, filters and hoses are sold against the Numatic part number, so match the code printed on the pack you are replacing rather than buying by colour. Henry, Hetty and James look alike but check the code before ordering; it is the surest way to avoid a return trip.
Genuine or Compatible Parts?
Genuine parts are made by or for the manufacturer: guaranteed fit and finish, usually at a higher price. Compatible parts are made by third parties: cheaper, with quality that varies by maker. Our rule of thumb: pay genuine prices for anything electrical or safety-related - batteries and chargers in particular - and consider compatible options for simple consumables such as filters and bags, checking recent reviews first. Whichever route you take, the model number in the listing must match the one you wrote down; that single check prevents most wasted orders.
Quick Answers
How do I know a spare part will fit my vacuum?
Match the model number on your machine to the part listing, then compare the shape and fittings in the product photos with the part you are replacing. If anything is unclear, ask the seller before ordering rather than after.
Is it worth repairing a vacuum cleaner?
For wearable faults - filters, brush bars, bins, tanks, hoses - usually yes: the part typically costs a small fraction of a new machine. If the motor itself has died on a budget model, weigh the part cost against a replacement.
How long do vacuum batteries last?
It depends on the cell type and charging habits, but a few years of regular use is normal before run time visibly drops. When it goes, a replacement battery is almost always cheaper than a new machine.
Once you know which part you need, compare live UK prices across merchants before you buy - and check back when a part shows out of stock, because spares listings update as retailers add them.
Leave a Comment
Comments
No comments yet. Be the first to comment!